5 Ways To Fix Broken Tiles At Home

Ways To Fix Broken Tiles At Home

Use Tile Adhesive for Small Cracks

For minor cracks or chips in tiles, tile adhesive can be a quick and effective solution. This adhesive fills in gaps and helps bond the crack, preventing it from worsening. Here’s how you can apply it:

• Clean the cracked area thoroughly.
• Apply a small amount of tile adhesive with a putty knife or similar tool.
• Press the adhesive firmly into the crack.
• Wipe away any excess and let it dry for 24 hours.

Grout Replacement for Cracked Grout Lines

If the grout between your tiles is cracked, but the tiles themselves are intact, replacing the grout is a straightforward fix. Follow these steps:

• Remove the old grout using a grout removal tool.
• Clean the area between the tiles.
• Apply new grout using a grout float, making sure to fill the gaps evenly.
• Wipe away any excess grout with a damp sponge.
• Let it cure for 24 hours before using the area.

Use Epoxy for Chips and Small Gaps

Epoxy can be a lifesaver for small chips or gaps in tiles. It’s a durable and waterproof solution, ideal for bathroom or kitchen repairs. Here’s how to use epoxy to fix broken tiles:

• Clean the broken area and let it dry completely.
• Mix the epoxy resin and hardener according to the instructions.
• Apply the mixture to the damaged spot and smooth it out using a spatula.
• Allow it to dry for 24-48 hours.

Tile Repair Kit for Larger Cracks

For more noticeable damage, consider using a tile repair kit. These kits typically contain tools, adhesive, and filler that can help repair both minor and medium-sized cracks. Here’s how to use a tile repair kit:

• Clean the damaged area and remove any loose pieces.
• Follow the instructions in the repair kit to mix the filler and adhesive.
• Apply the filler to the crack and smooth it with a spatula.
• Let the repair set according to the product’s drying time.

Replace the Damaged Tile

If a tile is severely cracked or broken, the best solution is to replace it entirely. Here’s a step-by-step guide to tile replacement:

• Use a chisel and hammer to carefully remove the broken tile.
• Clean the surface where the tile was located.
• Apply tile adhesive to the back of the new tile and press it firmly into place.
• Allow the tile to set for at least 24 hours.
• Once the tile is set, grout the edges to match the surrounding tiles.

Fixing broken tiles is easier than it seems with the right tools and techniques. Whether you're using adhesive for small cracks or replacing an entire tile, these solutions can help restore your home’s look without breaking the bank.

Don't Miss:5 Easiest Ways and Hacks To Increase Wifi Speed

For more such stories, stay tuned to HerZindagi.

Image Courtesy: Freepik