Which Water Purifier Is Better for Borewell Water at Home?

Worried about which purification system to buy? Then we are here to make you understand the factors that you should consider before making any purchase decision. And about what factors should be there in the models that can efficiently handle borewell water.

Water Purifier for Borewell Water
Water Purifier for Borewell Water

The water that comes from the borewell sources usually contains some risks that are not visible to the naked eye. The borewell water will always have a high TDS content as compared to other water sources, leading to an increased salt content and minerals in it. There could be other impurities, such as hardness, iron, dirt, odour, and bacteria, caused by soil contamination. Moreover, consuming water from such a source regularly may result in stomach disorders, kidney strain, and a bitter taste in foods or even in tea. Apart from this, it will also leave white deposits on dishes and corrode geysers, faucets, and dishwashers. Additionally, regular filters will not solve all these problems, as well as a proper purifier is needed, depending on the TDS levels.

Explore More in the HZ Your Picks

Vetted Options

Every product we recommend is carefully selected through a thoughtful blend of primary research and in-depth analysis of trusted sources.

How Borewell Water Differs From Other Sources?

The borewell water supply comes from underground, hence it contains more minerals than municipal water. It consists of some characteristics that make it unique, including:

High TDS: The borewell water generally consists more than 500ppm of total dissolved solids, which certainly indicates that the water is completely loaded with minerals such as calcium, magnesium, and sodium. Whereas, excess presence of dissolved solids gives water a salty taste and causes scaling in vessels.

Hard Water: The hardness of water occurs due to an excess presence of calcium and magnesium ions. This results in reduced lathering of soap, dryness of skin and hair and scaling in pipelines, geysers, and kettles. 

Presence of heavy metals: According to all the places in India, borewell water might contain iron, arsenic, fluoride, or even lead. Because of which water becomes unsafe to drink as these elements are toxic in nature and not filterable through conventional methods.

Which Type of Water Purifier Works Best for Borewell Water?

  • RO (Reverse Osmosis) water purifier is a must if your borewell TDS is above 500 ppm, as it uses a small, nice layer of membrane to remove dissolved salts, heavy metals like lead and arsenic, along with the hardness of water. 
  • UV (Ultraviolet)UV uses light to kill bacteria, viruses, and germs, as it does not remove salts, mud, or metals. And, UV alone is not enough for borewell water unless your TDS is below 300 ppm, and the only issue is bacteria.
  • UF (Ultrafiltration)UF works like a very fine sieve, as it removes mud, dust, and larger germs, but cannot remove dissolved salts or metals. Therefore, it is useful as a pre-filter with RO or UV for borewell water.
  • Copper RO adds copper elements to the water that gives the benefits of copper-enriched water.

Why RO Purifiers Are Commonly Recommended for Borewell Water?

RO water purifiers are ideal for borewell water as they address the issues associated that comes with the supply. 

  • Firstly, most of the borewell water supply in India consists of TDS that is more than 500 ppm, which results in a salty taste and white scaling. Generally, an RO uses efficient micron membranes that uses a filter that removes dissolved salts such as sodium, calcium, and magnesium. Therefore, the system makes the water soft and protects household appliances and hair. 
  • Secondly, borewell water generally comes with metal impurities such as arsenic, lead, fluoride, and iron, and an RO efficiently eliminates these contaminants from the water. In addition, when used along with UV and UF, it eliminates bacteria and dirt too. 

Features to Look for Before Choosing a Purifier

TDS Capacity: The borewell water has high impurity levels, you should select a machine that is rated between 2000 and 2500 ppm TDS capacity. 

Storage Tank Capacity: Areas with borewells experience frequent electricity outages, and therefore, people are advised to select a capacity of 7 to 10 litres if they have a small to medium-sized family.

Pre-filter or Sediment Filter: Borewell water generally contains dirt particles as it is underground, so it is advisable to use an external filter to prevent damage to the membrane and save on maintenance costs.

Service Requirement: The RO membrane in your water purifiers requires servicing every six to twelve months, so you need to have a full assurance of that from the company. 

Electrical & Water Wastage: Mostly RO water purification system generally uses about two to three litres of water to purify at least one litre of water. Therefore, you need to consider an energy-efficient or gravity-based alternative during power cuts.

Read More in Home Solutions and Electronics.

Common Problems People Face With Borewell Water

  • To begin with, there is a high presence of TDS and sodium, which results in a salty taste of water, affecting the taste of tea, coffee, and daal. Kids, in particular, usually do not like it. 
  • The second problem is that the water supply mainly consists of hard water, which may result in scaling of vessels, geysers, and taps, clogging pipes and raising electricity bills that nobody wants to face. 
  • Thirdly, an excessive amount of calcium and salts is present in the borewell water supply, which results in removing oils from the skin, leading to hair loss and dandruff. 
  • Apart from this, bacteria, iron, and even heavy metals lead to stomach problems. In some cases, iron may also lead to reddening and bad smell because of sulphur.

How Can You And Your Family Avoid Such Situations?

  • By testing water for TDS and heavy metals that it might be containing. 
  • If the water contains more than 1 ppm of iron then you should add an iron-removal filter along with the appliance. 
  • You should also use a sediment pre-filter to double the membrane life. 
  • Invest in a good pump, as low borewell pressure needs a pump to prevent RO damage.

Final Verdict

Houses whose borewell water has a high TDS require a purifier with RO and TDS management, as RO technology can certainly remove excess salts, heavy metals, and hardness, which contribute to the taste and damage to appliances. However, when the TDS exceeds 500 ppm, you should have an RO filtration system. Along with this, for total protection of yourself from all impurities in the water, select RO+UV+UF combined with TDS management, as this combination of technologies removes salts, germs, and silt from your water and leaves behind good minerals. 

Read More:

Our Core Values

Clear, Honest Reviews

Each review covers standout features and potential drawbacks to help you choose with confidence.

Trusted Brands First

We prioritize products from reputable brands with a consistent track record and strong customer trust.

Value That Makes Sense

We highlight options that offer the best balance of price, features, and reliability, so you're not overpaying for hype.

Disclaimer: At Her Zindagi Your Picks, we prioritize providing up-to-date information on the latest trending commodities and goods. Links in this article are affiliate links. Please note that our product recommendations are based on independent research and analysis however, Her Zindagi Your Picks shall not be held liable for any claims, damages, or disputes arising under applicable laws, including the Consumer Protection Act, 2019. Any issues regarding product quality, delivery, or warranties must be directed to the respective manufacturer or seller. Furthermore, the products featured in this article are organized for reader convenience and are listed in no particular order of priority or ranking.

Faq's

  • What is the ideal TDS level for borewell drinking water?
    The ideal TDS usually ranges between 80 to 150 ppm after purification, and this particular range certainly tastes good, contains healthy minerals and is also considered safe for drinking.
  • How often should I replace the filters in my borewell water purifier?
    Pre-filter: 3-6 months. RO membrane: 6-12 months. UV/UF: yearly. Borewell mud and high TDS make filters wear out faster.
  • What are the common signs that my borewell water needs purification?
    Salty taste, white scaling on vessels, bad smell, red stains, hair fall, stomach issues, and soap not lathering are clear signs.

Loading...

Loading...